Terrazzo is a composite surface made of marble chips (or other stone, glass or shell) set in a cement or resin binder, then ground flat and honed or polished. It can be poured on site as a seamless floor or made in a factory as precast tiles, slabs and steps. The chips run through the full thickness of the material, so the pattern does not wear off.
This guide explains what terrazzo is made of, where it comes from, how precast terrazzo tiles are produced and how the main styles differ. It is written by Mozeks, a terrazzo and marble mosaic manufacturer based in Afyonkarahisar, Turkey, producing since 2006.

Terrazzo at a glance
| Composition | Aggregate (marble, granite, quartz, glass or shell chips) + binder (cement or epoxy resin) + pigments |
|---|---|
| Formats | Poured in situ (seamless), precast tiles, precast slabs, stair treads, skirting and bespoke elements |
| Finishes | Honed (matt to satin), polished (gloss), tumbled or textured |
| Typical tile size | Mozeks precast tiles: 406 × 406 × 18 mm; mosaics, hexagons, herringbone and fluted profiles in the Novita series |
| Uses | Floors and walls in homes, hotels, retail, offices, airports, schools and hospitals |
| Standard (precast tiles) | EN 13748-1 (internal use) and EN 13748-2 (external use) |
What is terrazzo made of?
Every terrazzo has three ingredients:
- Aggregate. Crushed marble is the classic choice because it grinds and polishes evenly. Granite, quartz, coloured glass, mother-of-pearl and even recycled porcelain are also used. The size of the chips — from a few millimetres to large irregular slabs — defines the look.
- Binder. Traditional terrazzo uses a cementitious binder: white or grey cement coloured with mineral pigments. Since the 1970s, epoxy resin has been used for thin poured floors, mainly in large commercial buildings.
- Pigment. The binder colour, or "base", is as important as the chips. At Mozeks the bases have names such as Light, Nardo and Scuro, so the same marble chips can read warm, neutral or dramatic.
Mozeks precast terrazzo tiles are made with natural marble aggregate in coloured bases.
Where does terrazzo come from?
The name comes from the Italian terrazza, terrace. In 15th- and 16th-century Venice, marble workers began pressing offcuts from their commissions into clay or lime mortar to make durable floors for their own terraces, then grinding the surface smooth. The technique became known as pavimento alla veneziana — Venetian flooring — and spread across Europe with Italian craftsmen.
Terrazzo reached its peak in the 1920s and 1930s, when Art Deco and modernist architects used it for station concourses, cinemas, banks and schools. The introduction of divider strips made it possible to lay large poured floors without cracking and to inlay patterns and logos. After decades as an "institutional" material, terrazzo returned to residential interiors in the late 2010s and is now specified for both homes and commercial projects.
Poured terrazzo vs precast terrazzo tiles
There are two ways to get a terrazzo floor:
- Poured in situ. A specialist contractor mixes the terrazzo on site, pours it between divider strips, lets it cure and then grinds and polishes the whole floor. The result is seamless, but the process needs a dedicated crew, a long programme and a very stable substrate.
- Precast terrazzo tiles. The terrazzo is cast, cured, calibrated and finished in a factory, then laid like stone tiles with adhesive and grout. Quality is controlled before the material reaches site, installation is faster and individual tiles can be replaced later.
Mozeks makes precast terrazzo. Our tiles arrive honed and calibrated, so a tiler can lay them without on-site grinding. For adhesive, joint and sealing recommendations for your project, ask our team.
How precast terrazzo tiles are made
- Selecting the aggregate. Marble is crushed and graded by size. Palladian and Scarpa designs use larger hand-placed pieces instead of graded chips.
- Mixing. Aggregate, binder and pigment are mixed to the recipe for each colourway.
- Casting. The mix is placed into moulds and compacted so the chips are evenly distributed and air is removed.
- Curing. Tiles cure slowly under controlled conditions to reach full strength.
- Calibration and grinding. The back is calibrated to an even thickness and the face is ground to expose the chips.
- Filling and finishing. Small pores are filled and the face is honed — or tumbled for a softer, aged edge.
- Inspection and packing. Tiles are checked for size, flatness and colour before packing.
Mozeks tiles are finished by hand, which is why each piece has its own arrangement of chips within a consistent colourway.
Types of terrazzo
Terrazzo is usually described by the size and arrangement of the aggregate:
- Fine or micro chip. Small, evenly graded chips for a calm, speckled surface. See Micro Chip Terrazzo.
- Large chip (Venetian). Bigger marble chips set closely together for a bold, graphic floor. See Big Chip Terrazzo.
- Palladiana. Large, irregular slivers of marble fitted together like crazy paving, with the binder visible between them. See Palladian Terrazzo.
- Geometric pieces. Rectangular marble pieces in a regular rhythm, a contemporary take on palladiana. See Scarpa Terrazzo.
- Patterned mosaics. Small terrazzo pieces cut and assembled into geometric patterns. See New Carreau Terrazzo.
Terrazzo vs marble
Marble is a natural stone quarried in blocks and cut into slabs and tiles. Terrazzo is a manufactured composite that contains marble. A marble tile shows one stone with its natural veining; a terrazzo tile shows many pieces of stone in a coloured base. Because terrazzo is cast, the designer controls the colour, chip size and pattern, and offcuts from marble processing can be put to use instead of being discarded.
Is terrazzo the same as terrazzo-effect tiles?
No. Terrazzo-effect tiles are porcelain or ceramic tiles printed with an image of terrazzo. They are thinner, lighter and usually cheaper, but the chips are a printed surface layer, the pattern repeats and the tile cannot be reground. We compare both in detail in Real terrazzo vs terrazzo-effect porcelain.
Where is terrazzo used?
Terrazzo is used for floors and walls wherever durability and design matter: hotel lobbies, retail and hospitality interiors, offices, airports, schools and hospitals, and increasingly kitchens, bathrooms and hallways in homes. Precast formats also cover stair treads, skirting, wall cladding and details such as the fluted terrazzo profiles used on counters and bar fronts.
Frequently asked questions
What's in terrazzo?
Chips of marble or other aggregate, a cement or resin binder, and pigment. In Mozeks tiles the aggregate is natural marble.
Is terrazzo a natural stone?
Terrazzo is a composite rather than a quarried stone, but traditional cement-based terrazzo is made almost entirely from natural mineral materials: stone aggregate, cement and mineral pigments.
Can you still get terrazzo flooring?
Yes. Poured terrazzo is still installed by specialist contractors, and precast terrazzo tiles like ours are made to order for UK and European projects and laid by ordinary tilers.
Can you pour your own terrazzo floor?
Poured terrazzo needs specialist grinding equipment and experience, so it is not a DIY job. Precast terrazzo tiles are the practical way to get real terrazzo without an on-site pour.
Is terrazzo still trendy?
Search demand for terrazzo tiles in the UK has been stable throughout 2025–2026, and the style has moved from fine speckles towards large chips, palladiana and textured formats. Read more in Is terrazzo still in style?
Work with Mozeks
Browse our terrazzo tiles or request samples and a project quote. Our team can help you choose a colourway, chip size and finish for your floor or wall.